TACOFLOW3 MAX / MAX PRO
MKTG-TRA-MAN-E9150400-10/2019-ENG
Instructions for installation and use
33
12.2.3 SETTING THE CIRCULATOR TO MAX MOD.
Change the circulator performance (head) accordingly by rotating the selector with the suitable tool. The selection of the
correct operating curve depends on the system characteristics and on the system heat demand.
LED
Position
Function
Purple (**)
ActiveADAPT (*)
Yellow (**)
010 V or PWM external input
Orange (**)
Lower Constant Curve CI
Intermediate Constant Curve CII
Green (**)
Lower Proportional Curve P1
Intermediate Proportional Curve P2
Blue (**)
MIN - MAX Variable Power Curve (0 to 100%)
(*)
Default Setting
(**)
It turns white to indicate there is air in the system or red to indicate there is an error
TAB. 20
(Setting the circulator to MAX mod.)
