6.2.2
Saving changes
NOTICE!
The set parameters are retained even when they
have not been saved. However, they will be lost in
the event of a power failure. To ensure the set
parameters are retained after a power failure, they
must be saved actively.
Personnel:
n
Operator
n
Heating and sanitary technician
1.
On the main page, select
‘Save settings’ .
2.
Press
[ENTER].
6.3
Setting the operating mode
The controller automatically starts in automatic
mode, and its control function starts straight away.
Personnel:
n
Operator
n
Heating and sanitary technician
1.
On the main page, open
‘Operating mode’ .
2.
Select
‘Automatic’ , ‘Manual’ , ‘Legio’ or ‘Test’ .
The operating modes “Manual mode” (Manual),
“Thermal disinfection” (Legio) and “Test proce-
dure” (Test) switch back to automatic mode
(Automatic) after a preset time.
H3000 E
Commissioning and operation
01/2023
Item no. 215251
EA no. EA-1291
Operating instructions
26
