INSTRUCTIONS
1. Unplug the D’Mand System power cord.
2. Connect Black, Green and Red leads from Motion Sensor to corre-
sponding Black, Green and White leads from Black 3-wire cord on
D’Mand System Pump (see wiring diagram). Use wire nuts provided
in kit. Use wire nuts or electrical tape to isolate Red and Black wire
leads in Gray Cord if round starter button is not installed.
D’MAND
®
SYSTEM
Motion Sensor
Installation and Wiring Instructions
102-205
PUMP
POWER
CORD
GRAY
2-WIRE
CORD
RED
BLACK
BLACK 3-WIRE
CORD
BLACK
BLACK
GREEN
WHITE
GREEN
RED
MOTION SENSOR
ROUND
STARTER
BUTTON
Plant ID No. 001-3886 Supersedes: December 1, 2008
Effective: January 1, 2011
A Taco resource – saving product
