background image

© 2013 Taco Electronic Solutions, Inc.

1

Installation Guide

502-045

CSM1 Chilled Beam Sensor Module

Self-Contained Interoperable Controller Model UCP-1 for Software Version 1

SUPERSEDES: New

EFFECTIVE: July 25, 2013

Plant ID: 001-4127

Table of Contents

CSM1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   2

Overview  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Purpose of This Guide . . . . . . . . . . . . . . . . . . . . . . . . .   2
Applicable Documentation . . . . . . . . . . . . . . . . . . . . . .   3

Typical Use  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Representations and Warranties  . . . . . . . . . . . . . . . . .   3
Installation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4

General  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Static Electricity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
FCC Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Before Installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5

About this Document . . . . . . . . . . . . . . . . . . . . . . . . 5
Inspecting the Equipment  . . . . . . . . . . . . . . . . . . . . 5
What is Not Included with this Equipment . . . . . . . . 5
Equipment Location . . . . . . . . . . . . . . . . . . . . . . . . . 5
Selecting a Power Source . . . . . . . . . . . . . . . . . . . . 5

Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5

Mounting the Device  . . . . . . . . . . . . . . . . . . . . . . . . 6
Routing Cabling to the Device . . . . . . . . . . . . . . . . . 6
Grounding the Device  . . . . . . . . . . . . . . . . . . . . . . . 7

Wiring Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7

Connecting Input Devices . . . . . . . . . . . . . . . . . . . . 8
Other Connections. . . . . . . . . . . . . . . . . . . . . . . . . . 8

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   9

Electrical Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Recommended Sensor Wire . . . . . . . . . . . . . . . . . . 9
Recommended LON Bus FTT-10A Network Wire . . 9
Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Mechanical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   10

Diagnostic LEDs  . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . 11

Summary of Contents for iWorx CSM1













Reviews: