Tableau TX1, User Manual

Page: 29 / 125

The Advanced Logical Imaging Setup switch sets the mode of operation for the Logical Imaging
setup screens. The default value is off, which provides a basic and easy-to-use search method
for targeting forensically valuable information on a given source drive. See the Logical Imaging
section for more details on basic and advanced setup modes.
Default settings can easily be restored to their factory set values. Simply select the Defaults
item from the side navigation menu and then scroll to the bottom of the default settings
screen. Select the Restore defaults item and all settings will be immediately returned to their
factory set values.
Updating TX1 Firmware
The TX1 firmware is on an SD card located on the back of the unit. When a TX1 firmware
update becomes available on the Tableau website, you can use the Tableau Firmware Update
(TFU) utility to update the SD card.
CHAPTER 3 Configuring the TX1 29