Tab Golden Island Nevada, Operating Instructions Manual

Page: 31 / 71

Here you can set the start value of the mechanical meters.
Once set correctly, you will have an electronic copy to monitor the mechanical meters (see Ac-
countancy, chapter 10.2, page 27).
If the machine is working correctly, there should occur only a small difference during a long period
of time which can occur by switching off the machine while the mechanical meters are running.
The Value per digit (impulse) defines the value of one digit.
If this value is higher than the smallest coin the coins will be accumulated and the meter counts
one digit after each Digit value completed.
The machine also counts the right number in case of power loss.
Therefore the basic value of the currency (i.e. 1 Euro) is recommended for this setting.
These settings can be changed only after RAM Clear or Factory Reset.
9.5 Currency
On some configurations you are able to select the Currency.
On some configurations it is also possible to change all game displays to credits instead of the
currency.
If Credits are selected, you can change the value for one credit.
(These settings can be changed only after RAM Clear or Factory Reset)
9.6 OTM
This menu is only visible in certain configurations.
If so, the machine can be connected to the OTM System of TAB-Austria.
If connected, the machine will transmit several data’s to the OTM-Server of TAB-Austria.
The operator can check the accountings „Total In“ and „Total Out“ on a secure TAB webpage
(https://service.championsnet.net) and therefore he is able to supervise all his machines which
are connected to the system.
OTM number:
This is a number which will be assigned from the server to this machine during the registration
process.
If there will occur a problem, this number is important for the Hotline of TAB.
Location number:
This is a number which will be assigned from the server to the location of this machine during the
registration process.
Button „Check connection“:
Here you basically can check the connectivity to the internet.
Registration for Live systems:
Press one of the Registration Buttons to register the machine either for a new location or an
existing location. For a new location you can to fill out all location specific data on the machine or
Page: 23