DTC-300 Getting Started Guide
Page 13
Table 1:
DTC-300 Front Panel
Indicator
Function
HEATER POWER switch
Powers the heaters ON and OFF
FAULT indicator
Indicates (lights) when an over-temperature condition is
detected
Heater temperature display: TOP, GUARD,
BOTTOM
Displays current temperature and setpoint for each heater
SPEED/INCREASE knob
Controls the speed at which the top stack moves up or down
MOVE/FREE switch
Activates the top stack pneumatics
UP/DOWN switch
Moves the top stack up/down
Air pressure gauge
Air pressure gauge for monitoring air pressure applied to the
top stack
Air pressure regulator knob
Air pressure regulator allows you to adjust the air pressure to
the top stack
