DHR/AR Series Environmental Test Chamber Getting Started Guide
Page 26
1
Place a “T” connector in the main air line to the rheometer, before the filter regulator, and then feed
through the supplied flow meter at 15 L/min. This is for the cooling air supply.
2
Connect
EXP-1
on the control box to
EXP-1
on the rear of the main electronics box. See the figure below.
Figure 26
Rear of main electronics box.
3
Connect the video out to a USB adapter, which is in turn connected to a USB port on the control PC.
Refer to the installation instructions provided by the original equipment manufacturer (OEM supplier)
for installing the driver needed for this device.
Figure 27
USB adapter assembly.
EXP-1
Video out
USB adapter
