DHR/AR Series Environmental Test Chamber Getting Started Guide
Page 10
The ETC Viewer
The ETC Viewer is as an option that can be used with the rheometer for the following purposes:
•
Viewing the edge of plates and cones and the torsion sample
•
Providing streaming video
•
Capturing images with data point (not fast sampling)
•
Viewing point image in TRIOS software and pseudo playback
The software provided with the ETC Viewer works with any USB camera so a web cam can be easily used
for Peltier tests. The viewer assembly is air cooled to allow it to perform over whole temperature range of
the ETC (–160 to 600°C).
WARNING: After ETC use, do not turn off the cooling air to the ETC
Viewer until the unit has returned to room temperature. Doing so could
damage the lens assembly and/or camera chip.
AVERTISSEMENT: Après l'utilisation de l'ETC, n'arrêtez pas le passage
de l'air de refroidissement vers l'afficheur ETC tant que l'appareil n'est
pas revenu à la température ambiante. Cela pourrait endommager
l'ensemble des lentilles et/ou la puce optique intelligente.
