TA Instruments RSA-G2, Manual

Page: 76 / 127

RSA-G2 Getting Started Guide Page 46
7 Connect the 12 V output from the router transformer into the router power port.
8 Connect the input from the router transformer into an AC outlet (100 to 240 VAC 50/60 Hz).
9 Power on the RSA-G2.
10 The power and two of the Ethernet LEDs light up on the Router.
11 Double-click on the TA Explorer icon on your controller desktop.
12 The RSA-G2 is recognized based on the Instrument ID.
13 Click on the instrument icon to establish communication between TRIOS software and the RSA-G2.
Connecting the Computer to LAN
If you wish to also connect the computer to a LAN, you will need to have already installed a network
interface card.
1 Locate the second Ethernet port on the back of the computer.
2 Plug on end of the Ethernet cable into the company’s Ethernet port.
3 Plug the other end of the Ethernet cable into the LAN.
4 Check the Ethernet port on the rear of the computer. If communication between the computer and the
LAN has been properly established, a solid green light and flashing yellow lights will appear at the port.
Connecting Accessories
Follow the instructions in the associated manual or online help for instructions on connecting any
accessories to the RSA-G2.
To install the various geometries, refer to TRIOS software Help.