TA Instruments Nano ITC Series, Getting Started Manual

Page: 4 / 46

Page 4 Nano ITC Getting Started Guide
Notes, Cautions, and Warnings
This manual uses NOTES, CAUTIONS, and WARNINGS to emphasize important and critical
instructions. In the body of the manual these may be found in the shaded box on the outside of the page.
NOTE: A NOTE highlights important information about equipment or procedures.
CAUTION: A CAUTION emphasizes a procedure that may damage equipment or cause loss of data if not
followed correctly.
Regulatory Compliance
Safety Standards
EMC Directive
This instrument has been tested to meet the European Electromagnetic Compatibility Directive (EMC
Directive, 2004/108/EC). The Declaration of Conformity for your instrument lists the specific standards to
which the unit was tested.
The instrument was designed specifically as a test and measuring device. Compliance to the EMC directive
is through IEC 61326-1 Electrical equipment for measurement, control and laboratory use - EMC require-
ments (1998).
As noted in the IEC 61326-1, the instrument can have varying configurations. Emissions may, in non-typi-
cal applications, exceed the levels required by the standard. It is not practical to test all configurations, as
the manufacturer has no control over the user application of the instrument.
Immunity Testing
The instrument was tested to the requirements for laboratory locations.
Emission Testing
The instrument fulfills the limit requirements for Class A equipment but does not fulfill the limit
requirements for Class B equipment. The instrument was not designated to be used in domestic
establishments.
A WARNING indicates a procedure that may be hazardous to the operator or to the
environment if not followed correctly.