TA Instruments Nano ITC 5300, Getting Started Manual

Page: 41 / 46

Nano ITC Getting Started Guide Page 41
Appendix: A
Buret Position Functions
ITCRun Software versions 1.8.7 and later include a new buret position reporting function. The buret can be
preset to any position from 0 to 100% of the syringe capacity. The positioning can be performed either via
a percent of the full stroke or directly in microliters.
Click Home Reset :
The desired buret position can be entered directly in µL. (In the case if the Standard Volume ITC, be sure to
set the correct syringe capacity in the
Setup tab). Enter the desired position in terms of µL and click Move .
The buret position field at the top of the ITCRun screen updates with the current position of the buret drive.