background image

GRILLE Assembly - Complete

Page 1

                         

The ZROADZ Series Grilles comes into 2 different configurations. One style features the LED Light Bar mounting hidden on the backside, while 

the other style has exposed mounting provisions on the face side of the grille. Please note this and identify your ZROADZ Grille Series configuration and follow the 
instruction version that corresponds with your grille

.

START HERE      

STEP 1

       

STEP 2

       

STEP 3

      

STEP 4

      

STEP 1       

STEP 2       

STEP 3       

STEP 4       

GRILLE CONFIGURATION STYLE 2   

EXPOSED LED LIGHT

HIDDEN LED LIGHT

GRILLE CONFIGURATION STYLE 1

ZROADZ Grille series - LED Installation Guide

FIG 1

FIG 2

FIG 1

FIG 5

FIG 7

FIG 1

FIG 5

FIG 7

FIG 3

FIG 3

FIG 2

FIG 6

FIG 8

FIG 2

FIG 6

FIG 8

FIG 4

FIG 4

Lay out your parts. From the backside of the grille, put 
into place the ZROADZ Logo Backing Plate.

Put into place one of the Bracket Tabs and seucre with 
provided Hardware as seen in Fig. # 2-4 and then from the 
backside of grille position LED Light Bar.

With LED Light placement set, put into position the 
remaining bracket  and the finally tighten LED and all 
Mounting Brackets into their final secured position.

Lay out your parts. From the backside of the grille, put 
into place the ZROADZ Logo Backing Plate.

Put into place one of the Bracket Tabs and seucre with 
provided Hardware as seen in Fig. # 1-4.

From the face side of grille slip the LED Light bar into 
place. On the opposite side, position the remaining 
bracket and finally tighten LED and Brackets into position.

There is a final step for both styles of ZROADZ Grilles. See 
both of the Figure #8 Images and note that there is an 
exposed hole. Use the Provided Hardware Button Head 
Screw and fill the hole and tighted down with Nut. This 
will create symetrical look from side to side.

Summary of Contents for ZROADZ Series

Page 1: ...e the ZROADZ Logo Backing Plate Put into place one of the Bracket Tabs and seucre with provided Hardware as seen in Fig 2 4 and then from the backside of grille position LED Light Bar With LED Light placement set put into position the remaining bracket and the finally tighten LED and all Mounting Brackets into their final secured position Lay out your parts From the backside of the grille put into...

Page 2: ...moved the plastic radiator shroud can be removed Fig 1 PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION Auto makers offer varied models to each vehicle and occasionally manufacture more than one body style of the same model To assure your part is correct our tech department can be contacted at tech trexbillet com to verify fitment or assist with tech questions All other inquires can...

Page 3: ... Gently lift the top of grille assembly up while pulling back at the same time Depress the four 4 release tabs located on the inside of the factory grille assembly with your flat head screwdriver Firmly grasp the grille pulling away from the vehicle to remove it Fig 3 Fig 3 Step 5 Flip grille face down and place billet grille into grille opening Align the tabs to the inner grille shell Carefully d...

Page 4: ...ion of your vehicle and its options and or modifications To adjust the angle of your Light Bar rotate the Light Bar to adjust the angle then tighten the hardware once the desired angle is achieved please be careful not to over tighten the mounting hardware or scratch the finish of the grille It is best to adjust the angle with the vehicle on level ground with lights facing a wall garage door or ot...

Reviews: