Page 1
START HERE
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION.
Auto makers off er varied models to each vehicle and occasionally manufacture more than
one body style of the same model. To assure your part is correct; our tech department can
be contacted at [email protected] to verify fitment and assist with technical questions. All
other inquires can be directed to [email protected]. In the event you do not have internet
access please call 1-800-287-5900.
STEP 1
1) Turn off engine and chalk tires with
stop block.
Open Hood. Disconnect Battery.
STEP 2
It is recommended to
lift the car off the ground
jack stands or car lift .
2) Begin by removing
all of the vehicle
components and
hardware that encloses
and secures the factory
grille to the vehicle
core support.
This means removing the
vehicle’s front fascia.
Start with the hood line
seal strip at the nose
of the vehicle. The plastic
push pin clips can be
removed with a flat head
pry bar or small pick.
Be gentle as these
clips can break quite.
easily. (Fig. 2)
* APPLICATION MODELS VARY. WE RECOMMEND TO VERIFY FITMENT BEFORE BEGINNING INSTALLATION PROCESS.
* IMAGES FEATURED IN THE INSTRUCTION DOCUMENTS MAY NOT ALWAYS EXACTLY MATCH YOUR GRILL.
FRONT BUMPER REMOVAL
PRO TIP:
Before you begin, use “3M Painters Tape” to
apply a protective guard around the work areas.
Attend to the fender and bumper valance. This will
help protect the paint and finish of your vehicle.
FIG 2
FIG 1
FIG 1
(1) Upper Class Grille - Main
- Black - Part #51982
(1) - Large Bottom Mounting Plate
(6) - #10 Screws
(6) - #10 Flat Nuts
(6) - Flat Washers
(6) - 10/32 Nylon Lock Nuts
(7) - Trim Panel Retainer Clips
- Drill
- 1/8” Drill Bit
- Screwdriver set (Phillips)
- Needle Nose Pliers
- Socket Set
- Ratchet Tool
- Heat Gun / Hair Dryer
- 1/2” Plastic Spatula
Tools Required
Hardware included
Parts included
GRILLE REMOVAL & Grille Installation Guide
Upper Class Grille
Main grille INSERT - #51982
2015 Subaru Impezra WRX / STI
