Making calls in the team/executive/secretary configuration
103
Step by Step
Trunk keys
The programmable sensor keys on multi-line phones function as
trunk keys. Every sensor key programmed as a "Trunk key" (key label:
Transfer Trk) corresponds to a trunk with the result that you can con-
figure up to six trunks in Octophon F640 HFA.
As a team member, you can independently program the following
• Direct station select
• Join/leave group
(not available on executive phone in an executive/secretary
team)
• Ring Transfer: On/Off
(only in an executive/secretary team)
You can also program a sensor key with the function "Forward Line"
(call forwarding) for each line.
LED displays on trunk keys
LED
Explanation
S
Off
– The line is in idle mode.
T
Flashing
1
[1] In this manual, flashing sensor keys are identified by this icon, regard-
less of the flashing interval. The flashing interval represents different
statuses, which are described in detail in the corresponding sections of
the manual.
– Incoming call on the line.
– Hold reminder is activated.
– The line is on "Hold".
R
On
– The line is busy.
