T.I.P. DHWA 4000/5 LED, Operating Instructions Manual, Page: 17 / 168

ENGLISH
2
These pumps cannot be used in swimming pools, ponds or basins where people are present, or for
pumping hydrocarbons (petrol, diesel fuel, combustible oils, solvents, etc.) in accordance with the
accident-prevention regulations in force. They should be cleaned before putting them away. See the
chapter “Maintenance and Cleaning”.
2. PUMPABLE LIQUIDS
Clean, free from solid bodies or abrasive substances, non-aggressive.
Fresh water

Rainwater (filtered)

Clear waste water
o
Dirty water
o
Fountain water (filtered)

River or lake water (filtered)

Drinking water


Suitable
o
Not suitable
3. TECHNICAL DATA AND LIMITATIONS OF USE

Supply voltage: 230V , see electrical data plate

Delayed line fuses (230V version): indicative
values (Ampere)

Storage temperature: -10°C +40°C
Model
DHWA 3000/4 LED 4000/5 LED
Electrical
data P1 Rated absorbed power [W] 850 1100
P2 [W] 600 750
Mains voltage [V] 1 ~ 230 AC
Mains frequency [Hz] 50
Current [A] 3.88 4.58
Capacitor [µF] 12.5 16
Capacitor [Vc] 450
Hydraulic
data Max. flow rate [l/h] 3.180 3.
900
Max. head [m] 43 45
Max. head [bar] 4.3 4.5
Max. pressure [bar] 6
Max suction depth [m/min] 8 m / < 3min
Range of
use Length of power cable [m] 1.5
Type of cable H07 RNF
Grade of motor protection IP X4
Insulation class F
Liquid temperature range [°C]
according to EN 60335-2-41 for
domestic use
0 °C / +35 °C
Max. particle dimension [mm] Clean water
Max. ambient temperature [°C] +40 °C
Weight DNM GAS 1'' M
Net/Gross weight approx. [kg] 9.6/11.8 10.3/12.5
Table 3
The pump cannot support the weight of the pipes, which must be supported in some other way.
4. MANAGEMENT
4.1 Storage
All the pumps must be stored in a dry covered place, with possible constant air humidity, free from vibrations and dust.
They are supplied in their original pack in which they must remain until the time of installation.
4.2 Transport
Avoid subjecting the products to needless impacts and collisions.
4.3 Weight and dimensions
The adhesive plate on the packaging indicates the total weight of the pump and its dimensions.
Model
Line fuses
230V 50Hz
P1= 850 W 4
P1= 1100W 6
Table1
Table2
GB
14