T-Home Comfort Pro, User Manual

Page: 42 / 52

40
Systematic Telephony Special Modes
Time Control
This feature cannot be used with a SIP terminal.
Several time groups can be configured in the Comfort Pro. Depending on the activated time group, incoming
calls are signalled on different terminals. It is possible to automatically change between these time groups,
according to a timetable set up by the system administrator, or to change them manually.
You can only program this function if the system administrator has activated the “Time control“ authorisation
for your user group.
Activating automatic time control
H*8#
This key combination activates automatic time control. The setting
remains unchanged until one of the available time groups is set
manually.
Manually setting a time group
H*8*Z
(number of the
time group, e.g.
1
)
#
You activate the required time group using this procedure;
automatic time control is then deactivated. Ask your system admin-
istrator about the number of configured time groups.