38
Systematic Telephony
Even More Protection
On ISDN telephones you can also activate the calling line identifi-
cation restriction function on a call-by-call basis by means of
a menu.
Changing the User PIN
H*99*
Z
(old user PIN)
*
Z
(new user PIN)
*
Z
(new user PIN)
#
When your system is first commissioned, the user PIN is “0000“.
Code-number procedures requiring a PIN should be unavailable to
other users.
For this reason, you should change the PIN when you start oper-
ating your telephone, and put the new number in a safe place. The
user PIN can be up to six characters long.
S
Please note:
Make sure you do not lose your new PIN. Contact your system adminis-
trator if you experience any problems.
You
cannot
change your user PIN on a SIP terminal with the code-
number procedure described here. You can do so, however, in the
Configurator
of the Comfort Pro. To do so, the system administrator
has to authorise you to change your personal information. For more
information, please refer to the online help of the Comfort Pro.
Intercept
The call numbers of malicious callers can be stored in your network operator’s exchange (if this service has
been implemented). This function works even if the caller has already hung up!
N
Note:
The feature can only be activated on ISDN telephones.
Summary of Contents for Comfort Pro
Page 1: ...Comfort Pro Operation on Standard Terminals User Manual...
Page 2: ......
Page 50: ...48 Notes Notes...
