T-Home Comfort Pro P 300, User Manual

Page: 39 / 152

37
Using a Headset Comfort Pro P 100/300/500 System Telephones
Using a Headset
You can telephone hands-free if you use a headset. A headset connected to a system telephone can be
switched on and off at the telephone (see also page 120 in the chapter entitled MenuCard “Phone
Settings” ). If the headset is switched on, you can accept or end a call by pressing the headset key
K
on
the system telephone, which switches off the microphone and handset on the telephone. If the headset is
switched off, the headset key operating function on the system telephone is not operational.
N
Note: If a cordless DHSG headset is used, the headset key
K
on the system
telephone is operated with the Talk key on the headset.
Read the instructions for the headset in the user guide.
The headset can be used in combination with the handset and the other keys of your system telephone (e. g.
hands-free/open-listening key
L
). The following table gives an overview of the different operating
situations. The headset must be switched on for these operations (see page 120).
Situation: Operation: Result:
You receive a call.
K
Press the headset key. You telephone with the headset
(LED of the key
K
is
illuminated).
or
g
Press the call key.
You want to make a call.
K
Press the headset key and
Z
enter the call number.
The call number is dialled (LED
of the key
K
is illuminated).
or
g
Press the call key and
Z
enter the call number
and when necessary
L
press the hands-free/
open-listening key.
Hands-free/open-listening is
switched on (LED of the
key
L
flashes).
You have entered a call number
(block dialling/automatic dialling).
K
Press the headset key. The call number is dialled (LED
of the key
K
is illuminated).
or
g
Press the call key