T-Home Comfort Pro P 300, User Manual

Page: 105 / 152

103
Programming the Call Keys Team Functions
6 Ring tone
: You can set the
Volume
and
Melody
for different types of incoming calls (
1ƒExternal
calls
,
2ƒInternal calls
,
3ƒVIP call
,
4ƒDoor call
) for each trunk key. Proceed as described in
the section “2 Ring Tone” on page 119.
5ƒCall wait. prot.
: While you are making a call, other calls for the call number of this team key are not
signalled by a call waiting tone (but at the team keys of other terminals unless call waiting protection was
programmed there). Use the
On
/
Off
options to switch the call waiting protection function on or off.
MenuCard “Prog. busy key”
g
Long press the busy key, then select …
1 Modify text
: The text currently assigned to the key is shown on the display of your telephone. To
change the text, press
O
. Delete the existing text with the
C
key and enter new text, if required.
Press
O
and confirm this with
Save
. If you delete the text, only the key’s call number will be displayed.
Direct-call Key
When a direct-call key is long pressed, no MenuCard is displayed. A direct-call key is configured exclusively
via the Configurator of the Comfort Pro Web console.