T-Comfort Comfort Pro S, Mounting And Commissioning Manual

Page: 80 / 200

78
Configuration Configuring the Comfort Pro S
3. The basic settings switch is designed as a key switch. The location of the switch can be found in the
chapter entitled Interface Cards starting on page 33. Press and hold the switch.
4. Replace the power plug in the mains socket. Wait about 30 seconds until the indicator on the front of the
Comfort Pro S constantly flashes.
5. Release the key switch.
The system data is now reset.
6. Push the cover all the way down.
LAN Factory Settings
This IP address configuration is activated in the unit’s factory and default settings:
Description Setting
Comfort Pro S’s IP address 192.168.99.254
Comfort Pro S’s net mask 255.255.255.0
Comfort Pro S’s Host name “host”
Comfort Pro S’s Domain name “domain”
DHCP server Active in “Dynamic and static address assignment”
mode
DHCP addresses in the LAN 192.168.99.130 to 192.168.99.169
DHCP addresses via RAS/ISDN 192.168.99.10 to 192.168.99.41
DHCP addresses via RAS/PPTP 192.168.99.50 to 192.168.99.79
DHCP addresses via RAS/IPSec 192.168.99.90 to 192.168.99.119
Net mask assigned via DHCP 255.255.255.0
Gateway assigned via DHCP 192.168.99.254