T+A PA 2500 R, User Manual

Page: 46 / 70

46
Basic settings of the PA 2500 R
(Configuration menu)
In the Configuration menu general device settings are adjusted. This menu is described in detail in the following chapter.
Calling up and operating
the menu

Briefly press the

-button on the front panel or on the

button on
the remote control handset to call up the menu.

When you open the menu, the following Select points appear on the screen:
Using the front-panel controls:

The volume knob is used to select any point within the menu system.

To change a selected menu item, press the volume knob to confirm your
choice, then adjust the value by rotating the knob.

After making the adjustment, press the volume knob again to adopt the new
setting.

You can interrupt the process at any time by pressing the

button; in
this case any changes you have made are discarded.

Holding the volume knob pressed in takes you one level higher in the menu
system.

Press the

button again to quit the menu.
Using the remote control handset:

Use the

/

buttons to select an item in the menu.

If you wish to change a selected menu item, first press the

button,
and then use the

/

buttons to alter it.

After making the change, press the

button again to accept the new
setting.

You can press the

button at any time to interrupt the process; the
change is then abandoned.

Press the

button again to leave the menu.