T+A MP 200, User Manual

Page: 19 / 60

5
Radio antenna
RADIO ANT This FM antenna input can be connected to a normal 75 Ohms FM home antenna or to
TV/FM cable networks.
j
The supplied antenna is suitable for receiving strong local stations. To receive weaker
stations, a proper outdoor or roof antenna is required. For first-class reception quality a
high-performance aerial system, competently installed, is a basic requirement.
6
System interfaces
USB SYS Audio connection to the DAC 200 or HA 200. Connect this socket to the USB SYS con-
nector on the DAC 200 or HA 200.
For details please refer to the wiring diagram
SYS OUT
Control interface for operation with a DAC 200 or HA 200.
j
If the MP 200 is operated in combination with a DAC 200 or HA 200, these sockets must
be connected to the USB SYS and SYS IN socket of the DAC 200 or HA 200.
CTRL Interface for later functions expansions.
7
Mains input
The mains lead is plugged into this socket.
8
WLAN socket
WLAN Input socket for WLAN antenna
j
If no wired LAN connection is found, the MP 3100 HV will automatically activate its
WLAN module and it will try to get access to your WLAN network.
19