65
Software update
Software update generally:
Software updates keep your
MP 1000 E
up-to-date. They bring new
optimisations like faster operation and new features which were not available at
the time the device was produced.
It may occur that after a software update some of your user defined settings like
network parameters or favourite stations are lost and have to be restored after
the update
.
Updating via the Internet
Updating the firmware via the
MP 1000 E’s Internet connection
The basic requirement is a functioning network with router and access to a
broadband Internet connection; the system must be operating.
Switch the machine on.
Call up the system configuration menu by pressing the
button on the
front panel.
Use the
/
buttons to select
the “
Device info
” menu item,
and confirm your selection by pressing the
button.
Select the “
Update
” menu point with the
/
buttons, then
press the
button to confirm your choice.
The Select option “
WEB
”
should now be active (highlighted).
The firmware update can now be started by pressing
.
The screen displays the current state of progress of the update.
Once the update has been completed (duration around ten minutes) the
device automatically switches itself off and restarts.
When the machine has restarted, the update is complete.
To ensure that the update was successful, access the “
Device Info
” menu
point mentioned above, and check the new firmware status.
It is also possible to carry out the update process using the SRC1 remote control
handset, as an alternative to operating the machine directly.
