T+A FD 100, User Manual

Page: 22 / 36

22
Operation
Introduction

 

The
FD 100 should first be given a full charge (see section entitled
‘First use’).
In general terms the machines are operated in the way described
in the instructions supplied with each device. The following section
describes in detail the variations from this rule.
The
FD 100 is fitted with a motion sensor. When you pick up the
handset, it automatically switches itself on from stand-by mode
(this function can be temporarily disabled; see “Settings” section).
If the handset is not moved for a particular length of time, it
switches back to stand-by mode. The period is user-variable, and
can be adjusted in the “Settings” section.
Screen
The graphic screen displays information on the machine’s status
and the music track currently being played, together with list
navigation data and the FD 100 ’s system settings. The displays
are context-sensitive, and vary according to the capabilities and
facilities of the device being operated, as well as the service or
medium to which you are currently listening.
Sectors of the screen during source playback

 

 

Indicates the selected source.
      
The set volume level is shown here; you can also see
whether the loudspeakers are switched on or off.

      
State of charge indicator for the rechargeable battery
(see ‘Charging’ section).


 

 

This area displays information relating to the current source,
e.g. album, artiste, track, radio station, etc.
