Systems With Intelligence IM500 Installation Manual Download Page 3

D017-0025-301-01 IM500-SM500 Installation Guide 

© 2020 Systems With Intelligence. All rights reserved. 

 

www.SystemsWithIntelligence.com 

support SystemsWithIntelligence.com 

 

 

 

 

1

 

Federal Communications Commission Radio Frequency 
Interference Statement 

 

This equipment has been tested and found to comply with the limits for a Class A digital device 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference when the equipment is operated in a commercial environment. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and used 
in  accordance  with  the  instruction  manual,  may  cause  harmful  interference  to  radio 
communications.  Operation  of  this  equipment  in  a  residential  area  is  likely  to  cause  harmful 
interference  in  which  case  the  user  will  be  required  to  correct  the  interference  on  his  own 
expense. 

CAUTION 

This product contains no user-serviceable parts. Attempted service by unauthorized personnel 
shall render all warranties null and void. Changes or modifications not expressly approved by 

Systems With Intelligence Inc. could void the user’s authority to operate the eq

uipment. Should 

this device require service please contact Systems With Intelligence. 

 

Contacting Systems With Intelligence 

 

 

 

6889 Rexwood Road, Unit #9, Mississauga, Ontario, L4V 1R2 Canada 

Phone: +1-289-562-0126 Email: [email protected]  

www.SystemsWithIntelligence.com 

Technical Support 

 

Interna1-289-562-0126     Fax: +1-289-562-0152 

Email: support @SystemsWithIntelligence.com 

Summary of Contents for IM500
















Reviews: