5
uCAN View
1.
uCAN View
1.1.
Introduction
The uCAN View is an Microsoft Windows based analyzer for uCAN device to probe all
transmitted data in the CAN bus.
It does not require a separate driver to operate.
The users can see all the CAN data from the provided utility.
The CAN data can be saved into DCU (Data CAN Unit) file and read from it.
With the timestamp feature, the users can check the time when the CAN data was
received.
Provides ‘Exerciser’ function that creates CAN frame and sends to other CAN
device.
Provides ‘Error Status’ to detect errors in CAN bus.
Provides ‘Advanced Function’ for setting numbers of widely used baud rate.
Supports ABOR (Automatic Bus-Off Recovery) and ART (Automatic Retransmission)
modes
1.2.
uCAN
uCAN is a device which connects to the USB port on the IBM compatible computer and
CAN bus by D-sub 9 pin port. It has a USB type A and DE-09P (male) for the CAN interface.
The image and the pin out of the product are as follows.
