17
Menu
4.2.3.
Filter
Click "Disconnect" button to use this function.
-
This function displays filtered transmitted/received ID on the ‘View’ area. There are
two methods of filtering, filter by selection and filter by range.
* When data is saved while filter function is enabled, all data is saved instead of just
filtered data.
Selection: CAN ID transmitted/received from uCAN View can be selected to be
displayed.
- Included:
Display frames related to these CAN IDs.
- Excluded:
Do not display frames related to these CAN IDs.
- >>:
Move CAN ID from ‘Included’ to ‘Excluded’.
- <<:
Move CAN ID from ‘Excluded’ to ‘Included’.
Range: Range of CAN IDs are entered to allow them to be displayed in the ‘View’
area.
- Standard:
Allow standard CAN frame within given range.
- Extended:
Allow extended CAN frame within given range.
- From
: Enter the starting ID that will be included.
- To
: Enter the ending ID that will be included.
