4.2 Fitting to concrete with threaded rods (accessory,
art. no. 134014)
4x
Drop-in anchor M10 (12 mm x 32 mm)
4x
Threaded rod M10 (1 m)
8x
Hex flange nut M10
Use a 12 mm drill to make 4 holes in the ceiling
with a depth of 40 mm. Distance between holes
is shown in dimensions drawing. Install drop-in
anchors (1) and attach threaded rods (2). Use
hex flange nuts (3) to mount ceiling mounting
kit on threaded rods.
Leave at least a 4 mm gap between
ceiling mounting kit and false ceiling to
prevent vibration noises.
VTR 200 Ceiling mounting kit
Installation instructions
210647
3
Systemair Sverige AB
