owner’s manual
9
Adjust the louver to achieve better cooling/heating effects
when cooling/heating.
■
Digital scroll floor standing type
Fig.4-16
Fig.4-21
●
When heating
Adjust the louver downwards (vertically).(
Refer to Fig.4-19
)
●
When cooling
Adjust the louver horizontally.(
Refer to Fig.4-18
)
Fig.4-18
Fig.4-19
Do not try to adjust the horizontal louver by hand.
When adjusting by hand, the mechanism may not operate
properly or condensation may drip from air outlets.
CAUTION
■
Adjust the air direction left and right
Hold the knob and move the louver.You will find a knob
on the left-side and the right-side blades.
Fig.4-20
Before opening the front panel,be sure to stop the
operation and turn the breaker OFF.
Do not touch the metal parts on the inside of the indoor
unit, as it may result in injury.
Open the front panel.
How to open the front panel:
(Refer to Fig.5-4)
.
CAUTION
■
Air flow selection
Table 4-1
Make air flow selection according to what suits you.
(Pleas refor to
Fig. 7-2
about the position of)
When setting the air flow selection switch to .
Air conditioner automatically decides the appropriate
blowing pattern depending on the operating mode/
situation.
During Dry mode,so that cold air does not come into
direct contact with people,air is blown upper air outlet.
Regardless of the operating mode or situation,air blows
from the upper air outlet.
Use this switch when you do not want air coming out of
the lower air outlet.(While sleeping etc.)
Operating
mode
Situation
Blowing
pattern
COOL mode
HEAT mode
When the room
has become fully
cool,or when one
hour has passed
since turning on
the air condition-
er.
So that air does
not come into dir-
ect contact with
people,air is blo-
wn upper air ou-
tlet,room tempe-
rature is equaliz-
ed.
At start of
operation or
other times
when the
room is not
fully cooled.
At times other than below.(
Normal time.)
Air is blown from the
upper and lower air
outlets for high spe-
ed cooling during
COOL mode,and for
filling the room with
warm air during
HEAT mode.
At start or when
air temoerature
is low.
So that air does
not come into
direct contact
with people.Air
is blown upper
air outlet.
When setting the air outlet selection switch to .
For switching the Auto/Manual mode of the lower air outlet,
one should unplug and restart the unit for mode renewing.
CAUTION
■
Two-way cassette type
●
Auto-swing
Press SWING button, the louver will swing up and down
automatically.
Fig.4-22
