English
The fan coil unit shall have a filter installed in the return air side. When the filter is not fitted inside
the unit, the installor shall install its own filter in the return grill or duct.
Caution
180
mm
19
SysCoil Comfort
14.1.2. AIR FILTER
Changing the filter is a maintenance operation that should only be performed by qualified personnel.
To avoid clogging of air filter, it is recommended to clean it regularly.
Filter changes are required at the regular intervals. The time period between changes will depend upon the
specific operating conditions.
Some applications such as hotels where there is a lot of lints from carpeting will require more frequent filter
changes.
If light cannot be seen through the filter, when held up to sunlight or a bright light, it should be washed or
changed.
14.1.2.1. AIR FILTER REMOVAL
1.
On units with feet, remove the "FTG" grille (if present) and the foot cover at electrical side (Refer to
2.
Release the "lock washers" on each side.
The attachment systems must be relocked in place after changing the filter.
Non compliance with these instructions can affect the unit’s electrical safety and render the qualified
personnel performing the work liable for any ensuing damage.
3.
Pushing the slides downwards.
4.
Take off the filter.
Filter
Summary of Contents for SysCoil Comfort SCC10
Page 2: ......
Page 23: ...APPENDIX ANNEXE ANLAGE ALLEGATO ANEXO APPENDIX ANNEXE ANLAGE ALLEGATO ANEXO...
Page 41: ......
