SystemAir Sense SNX, Installation,Operation And Maintenance Instruction, Page: 8 / 28

8
• Make sure that you have the necessary installation
accessories.
• Use installation material with fire resistance rating for
the installation location.
• Examine the packaging for transportation damage and
remove the packaging from the product carefully.
• Examine the product and all components for damage.
• Install the product in a location where there is space for
commissioning, troubleshooting and maintenance.
• Make sure that the installation location is clean and dry,
for full safety during electrical work.
• Make sure that the installation surface has sufficient
capacity to hold the weight of the product.
• Refer to the airflow direction arrows on the name plate
or on the product to install the product in the correct
position.
• Make sure that all cable glands are tight against the
cables to prevent leaks.
The unit should be stored and transported in such a way
that it is protected against physical damage that can harm
panels, handles, display etc. It should be covered so that
dust, rain and snow cannot enter and damage the unit
and its components.
5. Installation
4. To store the product
5.1 To do before the installation of the
product
5.2 To plan product installation
The product can be installed on the inner ceiling using the
mounting brackets that are provided with the product.
Make sure that the distances agree with the specifications
in the table.
If the product is built in to the false ceiling: Make sure that
it is possible to access all control devices and labels.
Unit L
min
[mm]
R
min
[mm]
H
min
[mm]
SNX 700 500 100 550
SNX 1000 500 100 650
Warning
Install the product in horizontal
position with the drainage pipe and
drip tray pointing down.
H1
Unit H1
[ mm]
SNX 700 255
SNX 1000 325
H
min
L
min
R
min