16
One service technician is needed for working on control
cabinet. It is hidden under the left extract bag filter.
1. Open the left door and remove the bag filter.
The control cabinet is located in the filter section.
2. Remove two screws on the left and right side of the
cabinet.
To open the control cabinet
2. Remove the middle panel carefully.
Leaves and pollution could plug up the air intake grille and
reduce the unit’s capacity. Check the air intake grille at
least twice a year and clean if necessary.
Even if the required maintenance, such as change of
filters is carried out, dust and grease may slowly build up
inside the fans. This will reduce the efficiency. The fans
The product has installed supply and extract air grilles.
After long period of time dust and pollutants can build up
on them, especially extract grilles. It is advisable to clean
them with a recommended interval of minimum once
a year. Do not remove them as you can damage casing
paint while doing that. Use cloth or soft brush for cleaning
these surfaces.
3. Remove the cabinet cover carefully so you do not
damage the insulation. Specifically take care on the cover
next to the cable glands..
To clean grilles and louvres
To clean the fans
7. To check and clean the product
Summary of Contents for Sense SNX
Page 1: ...Installation Operation and Maintenance instruction EN Sense...
Page 3: ...3...
Page 27: ...27...