SystemAir Sense SNX, Installation,Operation And Maintenance Instruction, Page: 12 / 28

12
Reattach the pump casing cover and tighten it with the
screws.
Fit the pump with vertical thrust, coaxial with condensate
drain connection in the direction of the unit casing.
Fasten the pump casing onto the unit casing.
The supply air grille blades can be manually turned blade
by blade to allow costumer to optimize direction of
airflow.
1st row of blades are vertical and allow following:
•
the spread the airflow to shorten the air throw distance
and lower supply air velocity,
• turning blades into same direction to force supply air
direction diagonally over room
2nd row of blades are horizontal and allow following:
• turning blades slightly up to create Coanda effect
(ceiling effect).
Insert the power cord through the opening on the casing
of the unit and into the electrical box.
Connect the power cable into the electrical box inside the
unit.
Attach the drain hose to the pump connection.
Tighten the cover with screws.
Note
If the unit is installed on the wall, darinage pipe needs
10 x 10 mm duct inside a wall so it can get to the
ceiling.
9mm
5.9 To adjust supply air grille