SystemAir Sense SNX, Installation,Operation And Maintenance Instruction, Page: 11 / 28

11
Caution
When drainage is led outdoor be sure
to protect the hose against freezing.
18mm
5.7 To connect the wall siphon to the
product (accessory)
The best position is to install it into the wall with a cover
left for commissioning, should it ever be needed. Check
Appendix 1 for list of accessories.
Siphon dimensions
For more information on siphon installation, see the
instructions included with the siphon.
min 0,2m ma
x 3,5m
5.8 To install the drain pump to the
product (accessory)
Pump installation
Open the accessory package containing drainage pump.
Loosen the screws of preinstalled kit, securing the pump
housing cover.
Remove the cap on the pump casing by pulling the cover
vertically from the notches.
The drain pump is bought as a preinstalled kit that needs
only to be attached to the unit with predefined holes on
the product.
lead the electric cable for the drain pump trough the
cable gland (mention where the cable gland is located)
and the insulation, and connect the cable in the prepared
connection box instide the product. Install water drainage
on the back side of the product.