11
4.3.1
To reset the filter change time
Once filter is changed, it is necessary to reset filter time. Go to
Filter
menu
(see 3.2.2
, page 4, pos. E) or if filter alarm is present,
click on alarm status line (see 3.2.2
, page 4, pos. 5)
and select filter alarm. Select
CHANGE FILTER
, in the pop up menu define a
new filter period and press
OK
to confirm selection.
Filter time is now reset.
Note:
The menu is locked by default. Enter a password (default
password is 1111).
To reset filter change timer for SAVE LIGHT
• Push and hold
and
buttons for 3 seconds to reset the filter timer
(filter change LED will turn off).
4.3.2
To select a different filter kit
Standard filters are designed for good outdoor air quality. It is possible to se-
lect and order filter kits for poorer air quality environment.
To change filter kit type
1. Touch
Select different filter kit
button in the alarm menu.
Alternatively, go to
Filter
menu (3.2.2
pos. E).
2. Select filter kit from the list.
3. Touch
OK
button.
4.4
To clean the heat exchanger
Danger
• Make sure that the Mains supply to the unit is disconnected before performing any maintenance or
electrical work!
Warning
• Beware of sharp edges during mounting and maintenance. Use protective gloves.
254297 | v01
