4/48 | User Manual S-BM2 | 202010
Warnings
Some damper parts may have sharp edges – therefore, to protect yourself from harm, please use gloves during
damper installation and manipulation. In order to prevent electric shock, fire or any other damage which could result
from incorrect damper usage and operation, it is important to:
1. ensure that installation is performed by a trained person.
2. follow the written and depicted instructions provided within this User Manual closely.
3. perform damper inspection in accordance with this User Manual.
4. check the damper’s functionality as per the “Smoke Control Damper Functionality Check” chapter before you
install the smoke control damper. This procedure prevents the installation of a damper that has been damaged
during transportation or handling.
IMPORTANT: Do not install non-functioning dampers!
Operating Conditions
S-BM2 smoke control damper is intended:
•
for installation in places which are protected against weather disruptions.
•
for ducts distributing air without any mechanical or chemical contamination.
•
for maximum air flow velocity 12 m/s.
•
for storage temperature minimum -20°C and maximum 50°C.
Accessory:
•
K1-S-BM2: Kit for Duct Installation
