4/4/2022
SEEK200
69
1. Check
Enable UPnP™
, and choose a friendly name for the camera, or you can use the
default name.
2. Select the port mapping mode to
Auto
.
3. Click
Save
.
N
o
t
e
UPnP™ function on the router should be enabled at the same time.
13.3.2 Set Manual Port Mapping
Steps
1. Check
Enable UPnP™
, and choose a friendly name for the device, or you can use
the default name.
2. Select the port mapping mode to
Manual
, and set the external port to be the same
as the internal port.
3. Click
Save
.
What to do next
Go to the router port mapping settings interface and set the port number and IP address to be
the same as those on the device. For more information, refer to the router user manual.
13.4 Multicast
Multicast is group communication where data transmission is addressed to a group of
destination devices simultaneously. After setting multicast, you can send the source data
efficiently to multiple receivers.
Go to
Configuration
Network
Basic Settings
Multicast
for the multicast settings.
IP Address
It stands for the address of
multicast host.
Stream Type
The stream type as the
multicast source.
Video Port
