4/4/2022
SEEK200
55
11.2.14 Enhance Regional Image
You can select the desired area of image to improve the coding quality. The regional image
will be more detailed and clear.
Steps
1. Go to
Configuration
Image
Display Settings
Image Enhancement
.
2. Select the area of regional image enhancement. You can select
OFF
to disable this
function, or select
Custom Area
to draw a desired area.
A red rectangle shows on the display, in which the image quality is improved.
11.2.15 Mirror
When the live view image is the reverse of the actual scene, this function helps to display
the image normally.
Select the mirror mode as needed.
Note
The video recording will be shortly interrupted when the function is enabled.
11.2.16 Video Standard
Video standard is an ability of a video card or video display device that defines the amount
of colors that are shown and the resolution. The two most common video standard used
are NTSC
and PAL. In NTSC, 30 frames are transmitted each second. Each frame is made up of 525
individual scan lines. In PAL, 25 frames are transmitted each second. Each frame is made up
of 625 individual scan lines. Select video signal standard according to the video system in your
country.
11.2.17 Digital Zoom
You can zoom
in the image
The larger the zoom size is, the more blurred the
image is.
