IPC/RSL8xxx-XxxxE: user documentation
DOC/IPC_RSL8-E; V1.9
© Syslogic Datentechnik AG, Switzerland, http://www.syslogic.com
10
/
80
If it can not be assured that the Ethernet LAN cabling does not get in contact with non-SELV
telecommunications or other high voltage cabling or equipment, an external isolation adapter
(Phoenix Contact FL ISOLATOR 100-M12, order number 2902985, or similar product) must
be inserted between this systems LAN port and the non-SELV telecommunications or other
high voltage cabling or equipment. This is mandatory to fulfill the requirements of the safety
standards.
Use an overload protected power supply or add an adequate fuse to fulfill safety requirements
in case of a short inside the system.
1.7.
Electro-static discharge
Electronic boards are sensitive to Electro-Static Discharge (ESD). Please ensure that the
product is handled with care and only in a ESD protected environment. Otherwise a proper
operation is not guaranteed and the warranty is not applicable.
1.8.
Life Cycle Information
1.1.6.
Transportation and Storage
During transportation and storage the products must be in their original packing. The original
packing contains antistatic and shock-absorbing material. It is recommended, to keep the
original packing in case of return of the product to the factory for repair. Note that the packing
is recyclable.
1.1.7.
Assembly and Installation
Observe the EMI-precautions against static discharge. Carefully read the assembly and
installation documentation (see chapter 5) before unpacking the products. Make sure that you
have all the necessary items ready (including all the small parts). Follow the assembly
guidelines in chapter 5 strictly.
The installation procedures must be strictly observed. Note that deviations from the installation
guidelines may result in degraded operational reliability or in unfavourable EM-radiation or
EM-susceptibility.
