27
Step 2: Push the ejecting shaft rightward. Step 3: Use a pliers to remove the circlip then
Take the left side of the ejecting shaft take away the bearing.
first then the right side.
Step 4: Use Allen key 2.0 to install lower dies into the ejecting shaft
and arrange them in a proper sequence referring to upper knife.
Step 5: Fix the upper knives in the desired position on the bar. Put the ejecting shaft back to
the machine. Move the lower dies to proper position to match the relevant upper knives
then screw up them. For ejecting sheets smoothly, the ejecting rollers should be
arranged in proper position. For convenient adjustment, the grub screws of lower dies
should be in a line.