manualshive.com logo in svg

Sys Tec Electronic USB-CANmodul, System Manual

Share
Download
Sys Tec Electronic USB-CANmodul System Manual Download Page 11

Getting Started

                                                                                                                                                

                                                                                                                                                

 SYS TEC electronic GmbH 2001     L-487e_6

9

2

 

Getting Started

What you will learn with this Getting Started example:

••••

installing the USB-CANmodul

••••

software installation

••••

connecting the USB-CANmodul to the host-PC

••••

connecting the USB-CANmodul to a CAN network

•

 

using PCANView (USBCAN)

2.1

 

Installation of the USB-CANmodul

Ensure that the individual components are not damaged.  The contents
of the USB-CANmodul are:

•

 

USB-CANmodul

•

 

Installation discs

•

 

Systems Manual (printed or as electronic version on the
installation discs)

•

 

USB cable

2.1.1

 

Software Installation

Note:

Install the software before connecting the
USB-CANmodul to the host-PC.

Installation and operation of the USB-CANmodul requires a host-PC
with a USB port that is running Microsoft Windows 98 or Windows
2000. The USB-CANmodul will not work under Windows NT
because there is no USB support in this operating system.

a)

 

Insert the USB-CANmodul Utility Disc that corresponds to your
operating system. Use disc 1/2 if your computer runs Windows 98,
for Windows 2000 machines use disc 2/2.

b)

 

Click on the “Start” button and choose “Run...”

Summary of Contents for USB-CANmodul











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands