manualshive.com logo in svg

Synway SMG-D Series, User Manual, Page: 55 / 70

Share
Download
Synway SMG-D Series User Manual Download Page 55

                                                           

Synway Information Engineering Co., Ltd

 

SMG-D Series Analog Gateway User Manual (Version 2.0.0)       

                                                                  Page 50 

Manipulation Interface

. 

3.10  System Tools 

System Tools is mainly for gateway  maintenance. It provides such features as IP modification, 
data backup and connectivity check.   

3.10.1 Management 

The table below explains the items on the Management Parameters Setting interface. 

Item 

Description 

WEB Port 

The port which is used to access the gateway via WEB. The default value is 80. 

Access Setting 

Sets the IP addresses which can access the gateway via WEB. By default, all IPs 

are  allowed.  You  can  set  an  IP  whitelist  to  allow  all  IPs  within  it  to  access  the 

gateway freely. Also can set an IP blacklist to forbid all IPs within it to access the 

gateway. 

SYSLOG 

Sets whether to enable SYSLOG. It is required to fill in 

SYSLOG Server Address

 

and 

SYSLOG Level

 in case SYSLOG is enabled. By default, 

SYSLOG

 is disabled. 

Server Address 

Sets the SYSLOG server address for log reception. 

SYSLOG Level 

Sets  the  SYSLOG  level.  There  are  three  options: 

ERROR

, 

WARNING,  INFO

  and 

DEBUG

. The default value is 

INFO

. 

Send CDR 

Sets whether to enable the feature of sending CDR. It is required to fill in 

Server 

Address

 and 

Server Port

 in case Send CDR is enabled. By default, 

Send CDR

 is 

disabled. 

Server Address 

The address of the server to receive CDR. 

Server Port 

The port of the server to receive CDR. 

NTP 

Sets whether to enable the NTP time synchronization feature. It is required to fill in 

NTP  Server  Address

, 

Synchronizing  Cycle

  and 

Time  Zone

  in  case  NTP  is 

enabled. By default, 

NTP

 is enabled. 

NTP Server Address 

Sets  the  Server  address  for NTP  time  synchronization.  By  default,  the  address  is 

time.nist.gov 

Synchronizing Cycle 

Sets the cycle for NTP time synchronization, calculated by s, with the default value 

of 3600. 

Daily Restart 

Sets whether to restart the gateway regularly every day at the preset 

Restart Time

. 

By default, this feature is disabled. 

Restart Time 

Sets the time to restart the gateway regularly. 

System Time 

The  system  time.  Check  the checkbox  before 

Modify 

and change the  time  in  the 

edit box when NTP is disabled. 

Time Zone 

The time zone of the gateway. 

3.10.2 Configuration File 

The  Configuration  File  interface  includes  two  files:  SMGConfig.ini  and  ShConfig.ini.  You  can 
check  and  modify  the  items  in  these  configuration  files  through  this  interface.  Configurations 
about the gateway server, such as route rules, number manipulation and so on, are included in 
SMGConfig.ini; configurations about the board are included in ShConfig.ini. You can modify these 

Summary of Contents for SMG-D Series







































































Reviews:

No comments