Synway Information Engineering Co., Ltd
SMG-D Series Analog Gateway User Manual (Version 2.0.0)
Page 13
Total Calls in Cycle
Number of FXO outbound calls during the specified period.
Total Call-ins
Total number of calls coming in from the FXO port.
Connected Call-ins
Total number of calls that are incoming from the FXO port and successfully
connected.
Call-in Connection
Rate
Percentage of connected incoming calls to total incoming calls.
Total Call-in Length
Total call duration for calls coming in from the FXO port.
Total Call-outs
Total number of calls going out from the FXO port.
Connected Call-outs
Total number of calls that are outgoing from the FXO port and successfully
connected.
Call-out Connection
Rate
Percentage of connected outgoing calls to total outgoing calls.
Total Call-out
Length
Total call duration for calls going out from the FXO port.
3.2.4 SIP Message Count
The SIP Message Count interface is used to record the amount of the normal SIP messages that
are sent/received or repeatedly sent/received during the period from the startup of the gateway
service to the latest open or refresh of the interface. Click
Refresh
to refresh the count of SIP
messages, or click
Clear
to clear the current count of SIP messages.
3.3 Quick Config
Go to the Quick Config interface. Follow the gateway Quick Configuration wizard and you can
easily complete the settings on network, SIP and FXS/FXO. The gateway can work normally after
configuration.
See the Quick Config-Network Settings interface. Refer to
configuration, click
Next
to enter the SIP Settings interface.
See the Quick Config-SIP Settings interface. The configuration items on this interface are the
same as those on the SIP interface. Refer to
for detailed settings. You are required to fill with
the information about the registrar if the gateway must be registered. After configuration, click
Back
to go back to the Network Settings interface; click
Next
to enter the FXS Settings interface.
See the FXS Settings interface. The configuration items on this interface are the same as those
on the FXS interface. Refer to
for detailed settings. After configuration, click
Back
to go back
to the SIP Settings interface; click
Next
to enter the FXO Settings interface.
See the FXO Settings Interface. The configuration items on this interface are the same as those
on the FXO interface. Refer to
for detailed settings. After configuration, click
Back
to back to
the FXS Settings interface; click
Next
to enter the Quick Config-Completion interface.
Click
Back
to go back to the FXS Settings interface; click
Finish
to finish the Quick Config wizard
and now the gateway can work normally with basic configuration.
3.4 VoIP Settings
VoIP Settings includes six parts:
SIP
,
SIP Compatibility
,
SIP Station
,
SIP Server
,
NAT Setting
and
Media
.
SIP Settings
is used to configure the general SIP parameters,
SIP Compatibility
is
used to set which SIP servers and SIP messages will the gateway be compatible with,
SIP
Station
is to set the basic information of the SIP station,
SIP Server
is to set the basic information
of the SIP server,
NAT Setting
is used to configure the parameters for NAT, and
Media Settings
