Synthes Universal Battery Charger II, Instructions For Use Manual, Page: 8 / 40

6 DePuy Synthes Instructions for Use Universal Battery Charger II
Storage and Transport
All batteries / power modules should be removed for
transporting the charger.
The UBC II with a minimum of Firmware 17.2 allows the
user­to­charge­specific­DePuy­Synthes­Lithium­Ion­batter-
ies to 30% of their capacity for transportation in aircraft
cargo bays. Please refer to the section 30% State of
Charge within this IFU for detailed information.
Use the original packaging for shipping and transport.
If this is no longer available, please contact the
DePuy Synthes represen tative.
The same environmental conditions apply for transport
as for storage.
Warnings:
•
The device is designed to be operated and stored in
closed rooms. Do not use the device in the direct
vicinity of radiators or other heat emitting devices,
as these can affect the device.
•
Do not store/use the device in the presence of oxy-
gen, nitrous oxide or a mixture consisting of flam-
mable anesthetics and air.
Warranty
The warranty for the device is null and void if the device
has not been used properly or the guarantee seal has
been damaged. The manufacturer does not accept lia-
bility for damage resulting from repairs or maintenance
carried out by un authorized sites. For a complete
warranty statement, please contact DePuy Synthes
Customer Service.
Introduction
General Information