Synthes Universal Battery Charger II, Instructions For Use Manual

Page: 5 / 40

Universal Battery Charger II Instructions for Use DePuy Synthes 3
Introduction
Associated device systems with these instructions for use
are the Universal Battery Charger II (05.001.204).
The Universal Battery Charger II consists of the charger
(05.001.204). This charger is also supplied with a
­country-specific­power­cord­and­four­slot­cover­sets­
(05.001.228). The charger may only be used with the
supplied power cord.
Refer­to­section­‘Ordering­Information’­for­specific­
devices in scope.
The Universal Battery Charger II (UBC II), allows the
following Synthes batteries/power modules to be auto-
matically charged and manually checked. The below
table further also highlights the compatibility between
handpieces and batteries/power modules.
Introduction
General Information
System Handpieces Battery/Power Module
Battery Power Line 530.605 530.620* (14.4 V, NiMH)
530.610
­ 530.615­
Battery Power Line II 530.705 530.630 (14.8 V, Li-Ion)
530.710
­ 530.715­
Trauma Recon System 05.001.201 05.001.202 (25.2 V, Li-Ion)
­ 05.001.240­
Colibri/Small Battery Drive 532.001/532.010 532.003* (12 V, NiCd)
532.033* (14.4 V, NiCd)
Colibri­II/Small­Battery­Drive­II­ 532.101/532.110­ 532.103­(14.4­V,­Li-Ion)­
If required, Battery Power Line battery (530.620*)
and Colibri/Small Battery Drive batteries (532.003*,
532.033*) can also be refreshed with the charger.
Intended Use
The Universal Battery Charger II (05.001.204) is intended
for charging and/or conditioning of authorized Synthes
batteries and power modules.
Warning: The battery for the Power Drive (530.200)
cannot be charged with the UBC II. Please use the
UBC item number 530.600 or 530.601.
* Phased-out and no longer available for order.