background image

Universal Battery Charger II  Instructions for Use  DePuy Synthes    35

Battery is charged. The charger has switched to 
maintenance charge and checks that the battery 
is always fully charged and ready to use.

Yellow symbol: the battery is partially charged.  
The charging process is not completed.
Flashing yellow symbol: the battery is too hot. 

The battery is faulty and has to be replaced or the 
charger bay is faulty.

Button to check and refresh batteries and to 
check­Battery­Power­Line­II,­­Colibri II/SBD­II­
 batteries or power modules. Button to start the 
30% state of charge feature.

Symbol is yellow: the process to check and 
 refresh batteries and to check  Battery Power Line 
II, Colibri II/SBD II batteries or power modules is 
on going. Flashing yellow symbol: the inserted 
Trauma Recon System power module should be 
checked.

Symbol for  
Battery Power Line and  
Battery Power Line II batteries (530.620, 530.630) 

Symbol for  
Trauma Recon System power module 
(05.001.202)

Symbol for  
Colibri/SBD and Colibri II/SBD II batteries 
(532.003, 532.033, 532.103)

Explanation of Symbols Used 
Symbols for Operating the Charger

Summary of Contents for Universal Battery Charger II









































Reviews: