manualshive.com logo in svg

Synthes Anspach, Instructions For Use Manual, Page: 23 / 46

Share
Download
Synthes Anspach Instructions For Use Manual Download Page 23

Standard Attachments and Dissection Tool Assembly

Handpiece

Knurled Knob

Handpiece

Distal End

Arrows and

Symbols

SHORT

MEDIUM

LONG

MIA16

SHORT-HD

MEDIUM-HD

LONG-HD

XL-HD

eMax Straight Attachments

Straight Attachments

SHORT              5 cm Short Attachment
MEDIUM           8 cm Medium Attachment
LONG               11 cm Long Attachment
MIA16              16 cm Minimally Invasive Attachment
SHORT-HD        5 cm Heavy Duty Short Attachment
MEDIUM-HD     8 cm Heavy Duty Medium Attachment
LONG-HD         12.4 cm Heavy Duty Long Attachment
XL-HD               20.2 cm Heavy Duty Extra Long Attachment

Note:

Instructions are written such that distal end of hand-

piece and attachment are pointed away from user.

The arrows, symbols, and printing on the distal end of the
handpiece housing (“RUN” (

), “LOAD” (

) and “SAFE”)

refer to locking and unlocking the attachment and dissection
tool onto the handpiece.
1. Move handpiece knurled knob to “RUN” (

) position.

2. Slide attachment over distal end of handpiece. Pull

 attachment towards handpiece, and rotate attachment
to right approximately one-quarter turn until fully seated.
Handpiece knurled knob moves up to seat next to attach-
ment.

3. Pull handpiece knurled knob towards “LOAD” (

) posi-

tion and insert dissection tool into distal end of attach-
ment. Rotate dissection tool slowly until fully seated.

4. Release handpiece knurled knob into “RUN” (

) position.

Note: 

Handpiece is now fully functional.

5. Pull dissection tool to ensure proper engagement.
6. Attachment and dissection tool are secure.

Disassembly

1. Move handpiece knurled knob to “SAFE” position.
2. Remove dissection tool from distal end of attachment.
3. Rotate attachment to left approximately one-quarter turn,

and remove from distal end of handpiece.

22         

Synthes

      Anspach Electric Systems

Instructions for Use

0x6.001.507_AD  13.06.14  11:12  Seite 22

Summary of Contents for Anspach















































Reviews:

No comments