Synrad p250, User Manual, Page: 26 / 106

EUROPEAN UNION (EU) REQUIREMENTS ROHS COMPLIANCE PAGE | 26
1 Not available on p250 OEM lasers
When integrating NOVANTA
®
p250 OEM lasers, the Buyer and/or integrator of the end system is
responsible for meeting all applicable Standards to obtain the CE mark. To aid this compliance process,
NOVANTA testing program has demonstrated that p250 lasers comply with the relevant requirements
of Directive 2014/30/EU, the Electromagnetic Compatibility Directive, as summarized in Table 2 below.
Table 2-2 European Union Directives.
Applicable Standards/ Norms
2014/30/EU Electromagnetic Compatibility Directive
2014/35/EU Low Voltage Directive
2015/863/EU RoHS Directive
EN 61010-1:2010
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1:
General Requirements
EN 61000-6-4 Radiated Emissions Group 1, Class A
EN 61000-6-4 Conducted Emissions Group 1, Class A
EN 61000-6-2 Electrostatic Discharge Immunity
EN 61000-6-2 RF Electromagnetic Field Immunity
EN 61000-6-2 Electrical Fast Transient/Burst Immunity
EN 61000-6-2 Conducted RF Disturbances Immunity
Feature Location Description
Required by:
CDRH EN60825-1
Available on:
OEM P250
the laser tube rises
above safe operating
limits
Temp Indicator
Rear panel indicator
(Green/Red).
Illuminates green when
laser temperature is
within operating limits,
changing to red when
thermal limits are
exceeded.
No No Yes
Warning Labels
32-1 exterior
Labels attached to
various external housing
locations.
Warnings to personnel
of potential laser
hazards.
Yes Yes Yes