006-0006452 MPC-1500 Operator Guide
Rev P
37 of 48
03/03/2021 www.synqor.com
Section V
Control Interface Details
Control Cable Connections
There are two high-density (three-row) DB15 connectors located on the rear panel of the MPC:
The User I/O female DB15 connector on the left is a connection to a host/system computer so that it
can control the MPC and receive information regarding the status of the MPC.
The Configuration male DB15 connector on the right is for a connection between one SynQor
MPC and another when, for instance, they have their outputs connected in parallel and they
therefore need to communicate and coordinate with each other.
The designation/location of the pins for the User I/O female high-density DB15 connector is
shown below:
